This project varies the percentage by weight of the glass powder in the composites. After casting the composites to Selumetinib MAPK inhibitor the molds, they were cured at ambient conditions for 24 h. They were then postcured in a conventional oven and subjected to tensile and flexural tests. The contribution of the study was that if tensile and flexural properties were the most important factors to be considered in the applications of the composites, the maximum amount of glass powder can be added to the resin will be five (5) percent. It was also found that the fractured surfaces examined under scanning electron microscope were

correlated with the tensile and flexural strength It is also hoped that the discussion and results in this work would not only contribute toward the development of this website glass powder

reinforced epoxy composites with better material properties, but also useful for the investigations of tensile and flexural properties in other composites. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 123: 152-161, 2012″
“Two important issues concerning the scattering phases in a quantum wire with an attractive scatterer are investigated. We consider the case of two quasibound states which couple to a scattering channel and give rise to two Fano resonances. First, we examine the effects of temperature on the phase of the transmission amplitude and the Friedel phase. It is shown that temperature effects tend to smear sharp features of the transmission phase; namely, the phase drops become less than pi, and acquire finite widths which increase linearly in the low-temperature regime. The influence of temperature on the Friedel phase and density of states becomes stronger as the Fano resonance becomes narrower. Second, we examine the behavior of the Friedel phase when the energy of the incident electron crosses an infinitely narrow Fano resonance, forming bound state in the continuum. It is shown that the Friedel phase exhibits abrupt jump of pi at this energy.

We discuss this odd behavior in relation to the Friedel sum rule and point out its consequences on the charge in the scattering region. (C) 2011 American Institute of Physics. [doi:10.1063/1.3603028]“
“To achieve a stable blend of a bisphenol A type epoxy resin and poly(dimethylsiloxane) (PDMS), reaction between hydroxyl JQ-EZ-05 nmr (OH) groups of the epoxy and silanol groups of hydroxyl-terminated(HT) PDMS has been investigated. The chemical structures of the HTPDMS-modified epoxies were characterized by Fourier transform infrared (FTIR) and H-1- and C-13-NMR spectroscopy. To allow further understanding of the influence of viscosity and content of HTPDMS on the blend morphology, four different viscosities of HTPDMS were used in three content levels. The morphologies of modified epoxy resins were observed with optical microscopy. The modified epoxies were cured with a cycloaliphatic polyamine.